What are the production processes of latex gloves?
The rubber is first sliced by a rubber mixing machine, and then sent to a sol tank to mix with gasoline for sol. After the sol is emulsified and prepared, it is pumped to the latex intermediate tank. The rubber solution dissolved in gasoline is fed from the top of the distillation tower, and is heated and distilled by steam. The light component gasoline is heated into a gas phase, and the gasoline gas is mixed and cooled by cold water in the oil-air cooler. The oil-water mixture then goes to the oil-water separator, the oil-water layer. The upper layer of gasoline is recovered, and the lower water is pumped to the cooling tower for cooling. After cooling, the gas gasoline in the distillation tower is cooled; the latex of the distillation tower is sent to the latex mixing tank to stir according to its own pressure. Set aside after toning and filtering.
Main pollutants
1. Mold washing wastewater and glue-containing wastewater generated by the washing process of each production line.
2.A small amount of ammonia is produced during the production process.
3.Dust generated in the drying process.
4. Atmospheric pollutants such as SO2, NOx, and particulate matter generated during boiler operation.
5. Atmospheric pollutants such as SO2, NOx, and particulate matter generated during the operation of the standby diesel generator set.
6.Waste generated during the production process.
7. The sludge produced by the sewage treatment station, etc.
